Total Cost of Constructing 3.5 Marla House

Constructing a house on a 3.5 Marla plot involves a range of cost options that depend on the structure’s layout and the quality of finishes chosen in 3.5 Marla From a single-story ground floor to a four-story structure, each additional level adds significant area and cost. Homeowners can choose between basic food quality finished and high-end premium finishes, each with distinct impacts on the overall budget.

The following data provides a cost estimate for constructing a house on a 3.5 Marla plot for different structural layouts and finishing qualities.Grey structure costs are the lowest, with premium finishes significantly increasing overall costs.Adding more floors (up to four stories) significantly increases both the area covered and the construction costs.

Rough breakdown of covered area for a 3.5 Marla house:

•   Basement Floor Covered Area: 787.5 sq. ft.
•   Ground Floor Covered Area: 788 sq. ft.
•   First Floor Covered Area: 600 sq. ft.
•   Second Floor Covered Area: 500 sq. ft.
•   Grey Structure Cost (Basement/Ground/First/Second): 2600 per sq. ft.
•   A Quality Finishing Cost per sq. ft.: 3500 per sq. ft.
•   Premium Quality Finishing Cost per sq. ft.: 4300 per sq. ft.
  1. Square Feet Area of Houses (Middle Section) • This section calculates the covered area for different configurations:
    • Single Story: Only the ground floor.
    • Double Story: Ground + First floor or Basement + Ground.
    • Triple Story: Ground + First + Second floor or Basement + Ground + First.
    • Four Story: Basement + Ground + First + Second floor.
    • Each configuration is broken down by floor to show the cumulative covered area.
  2. Cost Calculations by House Configuration (Lower Section)

Each configuration is broken down into three construction qualities:

•   Grey Structure: Basic construction without finishing.
•   A Quality Finishing: Mid-level finishing.
•   Premium Quality Finishing: High-end finishing.

Single Storey House (Only Ground Floor)

•   Grey Structure Cost: 2,047,500 PKR
•   A Quality Finishing Cost: 2,756,250 PKR
•   Premium Quality Finishing Cost: 3,386,250 PKR

Double Storey House (Basement + Ground or Ground + First)

•   For Basement + Ground Floor:
•   Grey Structure Cost: 4,095,000 PKR
•   A Quality Finishing Cost: 5,512,500 PKR
•   Premium Quality Finishing Cost: 6,772,500 PKR
•   For Ground + First Floor:
•   Grey Structure Cost: 3,607,500 PKR
•   A Quality Finishing Cost: 4,785,000 PKR
•   Premium Quality Finishing Cost: 5,566,250 PKR

Triple Storey House (Basement + Ground + First or Ground + First + Second)

•   For Basement + Ground + First Floor:
•   Grey Structure Cost: 6,142,500 PKR
•   A Quality Finishing Cost: 8,268,750 PKR
•   Premium Quality Finishing Cost: 10,158,750 PKR
•   For Ground + First + Second Floor:
•   Grey Structure Cost: 5,655,000 PKR
•   A Quality Finishing Cost: 7,541,250 PKR
•   Premium Quality Finishing Cost: 9,152,500 PKR

Four Storey House (Basement + Ground + First + Second)

•   Grey Structure Cost: 8,202,500 PKR
•   A Quality Finishing Cost: 10,797,500 PKR
•   Premium Quality Finishing Cost: 13,023,750 PKR

This cost analysis breaks down construction estimates for a 3.5 Marla house by structural layout and finish quality, providing homeowners with a clear overview of potential expenses. Covered area ranges from 788 sq. ft. for a single-story to 2,675.5 sq. ft. for a four-story structure. Grey structure costs offer the most basic construction, while premium finishes provide a luxurious option at higher costs.

If you want to see 3.5 marla house design click here.

For more detail click on the given link below:

https://www.youtube.com/@GharPlansPakistan

Compare listings

Compare